Compare Models

Features

• SIMPLE OPERATION: Position the DR Stump Grinder over a stump, lock one wheel in place with the wheel brake, engage the cutting head, and pivot easily from side to side, shaving off an inch or so with each pass. Reposition the machine and repeat until the entire stump is reduced to a pile of wood chips.
• EASY TRANSPORT: With lugged, high-flotation tires and a lightweight design, the DR Stump Grinder is easy to transport to any stump on your property. And because of their size, the tires keep the machine elevated over the growing wood chip pile as you grind a stump away.
• MINING-GRADE TEETH: The cutter head features 8 steel teeth that are tipped with mining-grade tungsten carbide a material 10 times harder than steel and which is used for drilling through bedrock. Spinning at 2800 rpm, these teeth take a remarkable 372 "bites" per second!
• ENGINE: Our DR OHV engine with electric-starting provides 11.7 HP (19.6 ft-lbs gross torque*) — all the muscle you need to power through the toughest hardwood stumps of any size.
• SIMPLE HAND CONTROLS: Control the wheel brakes and engine throttle right from the handle bars. Lock one wheel in place while you pivot the machine back and forth to grind away a stump. Unlock and reposition as needed, right from your working position.
• Number of Teeth - 8
• Tooth RPM - 2,800
• Air Filter - Paper
• Cooling Methods - Air
• Engine Shaft Diameter - 1 in.
• Torque - 19.6 ft. lb. gross torque (per SAE J1940)
• Lubrication - Splash
• Number Of Cylinders - 1
• Oil Capacity - 37 oz.
• Oil Type - 30W HD
• Pre cleaner
• Starting Type - Electric
• Choke/Primer - Choke
• Fuel Shutoff Valve
• CARB Certified
• Assembly
• Optimized using FEA for strength
• Cutting Blade Material - Replaceable carbide tipped teeth
• Frame - 12 gauge
• Grease fittings
• 8 replaceable tungsten carbide-tipped grinding teeth.